Clutch Adjustment; Accessories - Avdel 74101 Instruction Manual

Putting into Service
C L U T C H A D J U S T M E N T
The clutch is supplied unset.
Correct clutch setting is necessary to ensure optimum deformation of the insert. If the deformation is insufficient (clutch
torque too low) the insert will rotate in the application. If the deformation is excessive (clutch torque too high) thread distortion
will occur and extensive wear on the drivescrew, may lead to fracture.
For details on how to adjust the clutch refer to maintenance instructions referring to the clutch on page 17.
Note: This may require that the clutch spring be changed.
A C C E S S O R I E S
Two different accessories are available to make the connection to your air supply:
Hose Connector
part nº 07005-00276
TO FIT 6.4 mm (1/4") BORE PIPE
1/4" BSP
Hose Assembly
part nº 07008-000324
L = 137 cm
9