Advertisement
Quick Links
Advertisement
Related Manuals for Digitus DS-55200
Summary of Contents for Digitus DS-55200
- Page 1 HDMI over IP EXTENDER Manual DS-55200 • DS-55201...
-
Page 2: Package Contents
1. Introduction Thanks for purchasing the DS-55200 HDMI over IP Extender (DS-55201 receiver only). We recommend that you read this manual thoroughly and retain for future reference. Features The HDMI over IP Extender allows you to extend video and audio up to 100 meters distance between source or computer and monitor or projector. -
Page 3: Specification
Specification Transmitter Receiver HDMI Output HDMI (Female) HDMI (Female) Console Connectors RS-232 Control Port Phone Jack Phone Jack PC Connectors DisplayPort Input HDMI (Male) Extension Port RJ-45 Full HD Video / Audio Extension RJ-45 Ports 1 (Line Out) 3 (Line In or Line Out) Cascaded-Chainable up to 10 layers Audio... - Page 4 Transmitter (TX)-Front Transmitter (TX)-Rear Connected to Power Adapter DC 5V/2A Power LED (Solid Red when power present) Link LED (Solid Green when link present) RS-232 control port HDMI IN, connected to HDMI source HDMI OUT, connected to display Cat.5e/6 cable connected for data out IR Blaster /Emitter Reset Button Receiver (RX)-Front...
- Page 5 Applic cation D iagram 1-to-1 connec ction Using g network k environ nment...
-
Page 6: Transmitter Installation
Transmitter Installation • Connect UTP Cable to Transmitter, please use CAT.5e/6 Cable • Connect the IR Blaster Emitter cable or RS-232 to 3.5mm adapter to the Transmitter Unit IR Port or RS-232 control port if necessary. • Connect Transmitter with HDMI cable to HDMI connector of HDMI source •... - Page 7 Casca ade Chai in Conne ection Use UT TP Cable c connected with Rece iver to link k the other two (2) Re eceiver Un consec cutively to e extend ano other 100m m distance, , the cable connector r node is to connec ct to Receiv ver LINE1...
- Page 8 Single e Source e Extens ion and R Receiver rs Casca ade Chai ning Single e Source e with Mu ultiple Re eceivers Cascad...
- Page 9 Cascaded and mixed with VGA / HDMI / DisplayPort IR Bypass Function Connection • Connect the IR Transmitter (or Emitter) cable to the IR Connector on the DisplayPort Transmitter Unit (TX) • Connect the IR Receiver cable to the IR Connector on the DisplayPort Receiver Unit (RX) •...
- Page 10 RS-232 Bypass Function Connection • Connect the device, such as a PC, projector…etc, to the RS-232 port of the DisplayPort Transmitter Unit or DisplayPort Receiver Unit via a RS-232 to 3.5mm adatper • Connect the controlling device to the RS-232 port of the HDMI Receiver Unit or HDMI Receiver Unit via a RS-232 to 3.5mm adapter...