Print Side Face Up Or Face Down - Sharp MX-C300P Operation Manual

PRINT SIDE FACE UP OR FACE DOWN

Paper is loaded with the print side face up or face down depending on the paper type and tray.
The loading orientation of punched paper, letterhead paper, and pre-printed paper differs from that of other paper.
For details, see "Example: Placement orientations of punched paper, letter head paper, and pre-printed paper" (p.14).
Trays 1 to 2
Load the paper with the print side face up.
However, if the paper type is "Pre-Punched", "Letter Head" or "Pre-Printed", load the paper with the print side face down.
Bypass tray
Load the paper with the print side face down.
However, if the paper type is "Pre-Punched", "Letter Head" or "Pre-Printed", load the paper with the print side face up.
Example: Placement orientations of punched paper, letter head paper, and pre-printed paper
Pre-punched (Left binding)
Tray 1 to 2
Load the paper with the print
side facing down with the
punch holes toward the back.
Bypass tray
Load the paper with the print
side facing up with the punch
holes toward the back.
Letter head
Load the paper with the print
side facing down with the letter
head (top edge) toward the
left.
A
Load the paper with the print
side facing up with the letter
head (top edge) toward the
right.
14
BEFORE USING THE MACHINE
Pre-printed
Load the paper with the print
side (pre-printed side) facing
down with the top edge toward
the left.
Load the paper with the print
side (pre-printed side) facing
up with the top edge toward
the right.
A