Sharp MX-C300P Operation Manual page 50

Macintosh
(1) Select [Color].
(2) Select colour print settings.
To use the Mac OS Color Management function, select
the [ColorSync] checkbox
"Image Type" cannot be selected.
(3) Select the Image Type.
An image type to match the data to be printed can be
selected from the pull-down menu.
• Standard (for data that includes text, photos, graphs,
etc.)
• Graphics (for data with many drawings or illustrations)
• Photo (for photo data or data that uses photos)
• CAD (for engineering drawing data)
• Scan (for data scanned by a scanner)
• Colorimetric (Data which needs to be printed in
almost the same colours as those on the screen)
• Custom (for data to be printed with special settings)
[Neutral Gray] can be used when [Custom] is selected.
The following colour management settings are available.
• Windows ICM checkbox*
• ColorSync checkbox:
• Source Profile:
• Rendering Intent:
• Output Profile:
2
• CMYK Correction* :
• Screening:
• Neutral Gray:
• Pure Black Print:
• Black Overprint:
• CMYK Simulation:
• Simulation Profile:
*1 Cannot be enabled when using a PS printer driver in Windows 7/Vista/Server 2008/8/8.1/Server 2012.
*2 Only the PCL6 printer driver can be used.
(1)
(2)
. When this is done,
1
: Colour management method in a Windows environment
Colour management method in a Macintosh environment
Selection of the input colour profile used for the printed image
Standard value used when converting the colour balance of the image displayed on
the computer screen to a colour balance that can be printed by the machine.
Selection of the output colour profile used for the printed image
When printing a CMYK image, you can correct the image to obtain the optimum
result.
Select the most suitable image processing method for the image being printed.
Select whether grey halftones are printed with single-colour black toner or 4-colour
CMYK toners.
Select whether black areas are printed with single-colour black toner or 4-colour
CMYK toners.
Prevents whitening of the outline of black text.
The colour can be adjusted to simulate printing using the process colours used by
printing presses.
Selecting a process colour.
(3)
(4) Select advanced colour settings.
If you wish to select detailed settings, click the
[Advanced] tab.
To configure colour management settings, select the
desired settings from the menus. To use "CMYK
Simulation", select the [CMYK Simulation] checkbox
and then select the desired setting.
50
PRINTER
(4)