Sharp MX-C300P Operation Manual page 70

Misfeed in the paper feed area A
1
Carefully remove the misfed paper. Turn the roller rotating knob in the direction of the
arrow to assist in removing it.
Roller rotating knob
2
Close the side cover.
The message " Clear paper path." will be cleared and printing will be possible.
• When closing the side cover, press on around the handle.
Note
• If the message does not clear, check again to make sure that no pieces of paper remain.
Misfeed in the fusing area B
1
Lower the fusing unit release levers to allow easier removal.
Fusing unit release levers
2
Lower the part with the green label that protrudes from the fusing unit paper guide,
and open the fusing unit paper guide.
Fusing unit Be careful not to tear the misfed paper during removal.
The fusing unit is hot. Do not touch the fusing
Warning
unit when removing misfed paper. Doing so may
cause a burn or injury.
When removing misfed paper, do not touch or damage the
Caution
transfer belt.
70
TROUBLESHOOTING