Receiving, Inspecting And Unpacking The Wine Guardian System; Review The Packing Slip To Verify; Check The Unit For - Wine Guardian TTW009 Installation, Operation And Maintenance Manual

Receiving, Inspecting and Unpacking the Wine
Guardian System
NOTE: Wine Guardian systems are factory assembled and tested prior to
shipment.
Wine Guardian systems are shipped individually in corrugated boxes specially designed to
protect the equipment during shipment.
 Before opening the container, inspect the packing crates or boxes for obvious signs
of damage or mishandling.
 Write any discrepancy or visual damage on the bill of lading before signing.
 Inspect all equipment for any sign of damage caused during transit.
 Report all visual or concealed damage to the carrier and file a claim immediately.

If this procedure is not followed, the shipping company may reject the
claim and the consignee may suffer the loss. Do not return the shipment
* DO NOT LIFT THE UNIT UP FROM ITS PLASTIC FRONT PIECES
**THE UNIT SHOULD BE LIFTED FROM UNDERNEATH ITS BASE AT

Review the Packing Slip to Verify:

 Model number
 Factory-installed options
 System accessories
If any items listed on the packing slip do not match your order information, contact the place
of purchase immediately.
Check the unit
 An electrical power cord (factory installed on condenser side)
 The Easy Mount™ Through-the-Wall mounting sleeve.
 Accessories such as condenser air duct collar or duct collar kit, and optional controls, if
ordered.
5
IMPORTANT
to the factory.
TO AVOID DAMAGING THEM
BOTH ENDS OF THE SYSTEM.
for:
WARNING