Wine Guardian TTW009 Installation, Operation And Maintenance Manual page 12

– Condensate from the evaporator coil is directed to the condensate removal system
Internal Drain
at the condenser end of the unit. This allows the drain pan to drain freely. No external trap is
required.
– The factory-charged circuit includes a capillary tube expansion device, a filter
Refrigerant Circuit
dryer, and a manual reset high pressure switch. See Refrigeration Illustration on page 13.
– These are made of rugged ABS plastic and factory mounted to automatically
Supply/return grilles
seal to the chassis. Air is introduced through the sides and bottom and discharged through the
front perforated section.
– Two directional louvers are located within the evaporator supply air dis-
Directional Louvers
charge opening on the Wine Guardian unit and can be accessed by removal of the wine cellar
side faceplate. The louvers are designed to be manually adjusted to direct air flow from side-to-
side or straight on. The louvers can help direct cold air into the center of the wine cellar should
the Through-the-Wall unit be mounted in a corner of the room.
12