Table of Contents
Advertisement
C
h
a
p
t
e
r
6
V
i
d
e
o
S
e
a
r
c
h
C
h
a
p
t
e
r
6
V
i
d
e
o
S
e
a
r
c
h
C
h
a
p
t
e
r
6
V
i
d
e
o
S
e
a
r
c
h
2. Check "transit enable". Then save the setting.
3. Input www.upnpicp.com in IE address; download and install Active X. Then a window
shows up as below:
4. Input the only device ID of the IP-CAM or user-defined name. And then input user name
and password.
5.5.4 Server Configuration
Enter into "Network Configuration" "Server Config".
1. Check "Do you want IP Camera to connect Server.
2. Check the IP address and port of the transfer media server in the ECMS/NVMS. Then
enable the auto report in the ECMS/NVMS when adding a new device. Then input the
remaining information of the device in the ECMS/NVMS. After that, the system will auto
allot a device ID. Please check it in the ECMS/NVMS.
3. Input the above-mentioned server IP, server port and device ID in the responding boxes.
IP-CAMERA User Manual - 23
Advertisement
Table of Contents
Need help?
Do you have a question about the I4-380IPVF and is the answer not in the manual?