5 Remote Configuration
Functions of remote configurations include: System Configuration, Video Configuration, PTZ
Configuration, Alarm Configuration, Network Configuration and Advanced Configuration.
You should firstly select the menu on the left, and then setup the relative parameters. When
one user configures parameters of a certain device, other users can not setup this device.
5.1 System Configuration
The "System configuration" includes three submenus: Basic Information, Date & Time and
SD card.
5.1.1 Basic Information
In the "Basic Information interface, user can setup the device name and also can check the
relative information of the server
Setting steps:
1. Clicking the "Config" icon will appear the menu list.
2. Clicking the "Basic Information "will pop up a window as shown below:
Parameter
Software version
Software build date
Kernel version
Hardware version
Mac Address
Maximum number of user
Device name
3. Input the name of the device in the "Device name" text box.
4. Press the "Save" button to save the settings.
5.1.2 Date & Time Configuration
Setting steps:
1.
Enter into "System Configuration"
C
h
a
p
t
e
r
6
V
C
h
a
p
t
e
r
6
V
C
h
a
p
t
e
r
6
V
The software of the device
The software build date of the device
The kernel version of the device
The hardware version of the device
MAC address of device
Support max 4 users to access
Name of the device.
"Date & Time".
IP-CAMERA User Manual - 12
i
d
e
o
S
e
a
r
c
h
i
d
e
o
S
e
a
r
c
h
i
d
e
o
S
e
a
r
c
h
Meaning
Need help?
Do you have a question about the I4-380IPVF and is the answer not in the manual?