Deleting A User Code - Ricoh 7650 Operating Instructions Manual

Registering Addresses and Users for Facsimile/Scanner Functions

Deleting a User Code

This section describes how to delete a user code.
Important
❒ After clearing the user code, the counter is automatically cleared.
A
Press [System Settings].
B
Press [Administrator Tools].
C
Press [Address Book Management].
D
Check that [Program / Change] is selected.
7
E
Select the name whose code is to be deleted.
Press the name key, or enter the registered number using the number keys.
You can search by the registered name, fax number, user code, folder name,
or e-mail address, or IP-Fax destination.
F
Press [Auth. Info].
G
Press [Change] to delete the user code, and then press {#} key.
H
Press [OK].
I
Press [Exit].
J
Press the {User Tools/Counter} key.
216