Ricoh 7650 Operating Instructions Manual page 58

System Settings
❖ DDNS Configuration
You can specify the DDNS settings.
The default setting is Active.
❖ Domain Name
You can specify the domain name.
The default setting is Auto-Obtain (DHCP).
Enter the domain name using not more than 63 single-byte alphanumeric
2
characters.
❖ WINS Configuration
You can specify the WINS server settings.
I f [ O n ] i s s e l e c t e d , e n t e r t h e W I N S S e r v e r I P v 4 a d d r e s s a s
"xxx.xxx.xxx.xxx"("x" indicates a number).
If DHCP is in use, specify the [Scope ID].
Enter a [Scope ID] using up to 31 alphanumeric characters.
The default setting is Off.
❖ Effective Protocol
Select the protocol to use in the network.
The default setting for "IPv4" is Active.
The default setting for "IPv6" is Inactive.
The default setting for "NetWare" is Active.
The default setting for "SMB" is Active.
The default setting for "AppleTalk" is Active.
❖ NCP Delivery Protocol
Select the protocol for NCP delivery.
The default setting is TCP / IP Priority.
❖ NW Frame Type
Select the frame type when you use NetWare.
The default setting is Auto Select.
❖ SMB Computer Name
Specify the SMB computer name.
Enter the computer name using up to 15 alphanumerical characters.
"*+,/:; <>=?[\]|. cannot be entered.
Setting a computer name starting with RNP and rnp is inhibited.
Use uppercase letters for alphabet.
❖ SMB Work Group
Specify the SMB work group.
Enter the computer name using up to 15 alphanumerical characters.
"*+,/:;<>=?[\]|. and spaces cannot be entered.
Use uppercase letters for alphabet.
48