Ricoh 7650 Operating Instructions Manual page 111

❖ Stamp Setting
You can specify how Date Stamp is printed.
• Stamp Position
You can specify where to print the Date Stamp.
The default setting is Top Left.
• Stamp Position
You can adjust the position of the Date Stamp within the available range
as shown below.
Metric version:
• "Top Left"...T/B: 4-144mm, L/R: 4-144mm
• "Top Centre"...T/B: 4-144mm, L/R: 72-72mm
• "Top Right"...T/B: 4-144mm, L/R: 4-144mm
• "Bottom Left"...T/B: 4-144mm, L/R: 4-144mm
• "Bottom Centre"...T/B: 4-144mm, L/R: 72-72mm
• "Bottom Right"...T/B: 4-144mm, L/R: 4-144mm
Inch version:
• "Top Left"...T/B: 0.1"-5.7", L/R: 0.1"-5.7"
• "Top Centre"...T/B: 0.1"-5.7", L/R: 2.8"-2.8"
• "Top Right"...T/B: 0.1"-5.7", L/R: 0.1"-5.7"
• "Bottom Left"...T/B: 0.1"-5.7", L/R: 0.1"-5.7"
• "Bottom Centre"...T/B: 0.1"-5.7", L/R: 2.8"-2.8"
• "Bottom Right"...T/B: 0.1"-5.7", L/R: 0.1"-5.7"
• Page to Stamp
Sets whether to print the stamp on all pages or only the first page.
The default setting is All Pages.
Stamp
3
101