Registering A Protection Code To A Group User - Ricoh 7650 Operating Instructions Manual

Registering Addresses and Users for Facsimile/Scanner Functions

Registering a Protection Code to a Group User

This section describes how to register a Protection Code to a Group User.
A
Press [System Settings].
B
Press [Administrator Tools].
C
Press [Address Book: Program / Change / Delete Group].
D
Check that [Program / Change] is selected.
E
Press the group key you want to register or enter the registered number us-
ing the number keys.
7
F
Press [Protection].
G
Press [Folder Destination] under "Protection Object".
H
Press [Change] under "Protection Code".
I
Enter a protection code using the number keys, and then press the {#} key.
J
Press [OK].
K
Press [Exit].
Note
❒ You can specify a protection code of up to eight digits. You can also specify
"Protection" without specifying a protection code.
268