Using The Erase Temperature Offset - Fargo Persona Persona C30e User Manual

RESTRICTED USE ONLY

Using the Erase Temperature Offset

Step Procedure
1 Adjust the Erase temperature for the rewriteable cards as needed.
•
Increase the Current Setting to cause more heat to be used in the
erasing process.
OR
•
Decrease the Current Setting to cause less heat to be used in the
erasing process.
(Note: Erase Temp Offset provides user ability to control the Printhead heat
level when the Erase Operation is performed. Appropriate heat levels should
be applied for the proper erase process. This setting should be adjusted for
proper erasure)
Persona C30e Card Printer User Guide (Rev. 1.1)
Fargo Electronics, Inc.
6-118