Fargo Persona Persona C30e User Manual page 123

RESTRICTED USE ONLY
Reviewing Frequently-asked Questions (continued)
Question
How do I reconfigure my
PC Printer Driver to
connect to a different
Printer or different IP
address?
How can I verify/change
what IP address my
installed Printer Driver is
expecting to find my
Printer?
Persona C30e Card Printer User Guide (Rev. 1.1)
Use the Windows "Add Printer Wizard" to create a printer
instance to communicate to the printer at the new IP
address.
This may require adding a new "Remote TCP/IP Card
Printer Port" configured to communicate to the printer at
the proper IP address.
See the appropriate Windows documentation for additional
help.
Follow this procedure.
1. Open the Printer Driver properties window.
2. Select Start -> Settings -> Printers and Faxes ->
[your Printer Driver] -> Properties.
3. From the Ports tab, select Configure Port. The Host
name will indicate IP address of the connected Printer.
(Note: If this does not match your Printer's IP
address, you can change it from this window.)
4. Enter the correct IP address.
5. Select OK.
6. Select Apply.
7. Select Close.
Fargo Electronics, Inc.
Answer
5-17