Kargo Master 4089D Instruction Manual page 7

ProMaster City Installation (Continued)
Mid Mount Location (8008A only):
 Apply sealant around the threaded insert in the roof.
 Place the RUBBER WASHER on top of the van CENTERED over the threaded insert. Be sure to apply
sealant thoroughly around threaded insert to prevent water from leaking into the cargo area.
 Place the foot on top of the rubber washer with the cup of the foot facing outwards.
 Using M6 x 22mm hex heads, 1/4" lock washers, and 1/4" flat washers, bolt through foot into the
threaded inserts in the roof, in the order shown.
Use
M6 x 22mm
bolts here.
 Snug tighten, but allow movement.
 Repeat for opposite side of vehicle.
Mount rack to feet per instructions that came with rack.
For Technical Support Call: 800-343-7486, Monday-Friday, 7AM - 4 PM (PST)
Instructions – 4089D
Page 6