Hollyland SOLIDCOM M1 User Manual page 23

PARAMETERS
Interfaces
Power Supply
Frequency Response
Signal-to-Noise Ratio
Distortion
Use Range
Frequency Band
Modulation Mode
Transmit Power
Receiving Sensitivity
Frequency Bandwidth
Power Consumption
Dimension
Weight
Working Temperature
SAFETY PRECAUTIONS
Do not place the beltpacks in the accessories or inside of Heating Equipment, Cooking
equipment, High-Pressure Containers, etc. (Such as Microwave Ovens, Induction
Cookers, Electric Ovens, Electric Heaters, Pressure Cookers, Water Heaters, Gas
Stoves, etc.) to prevent the battery from overheating and exploding. The Charger, data
cable and battery of the original matching model must be used. Using chargers, data
Cables, and batteries that are not certified by the manufacturer or of non-matching
models may cause Electric Shock, Fire, Explosion, or Other Dangers.
Station
POE Interface (RJ45)
Power Supply Interface (RJ45)
4 Wire Audio Interface
USB Interface
2 Wire Audio Interface
USB Type-C Interface
POE Power Supply
NP-F Type Battery
200Hz to 7KHz
>50dB
<1%
450 Meters Line-of-Sight Usage
1.9GHz
GFSK
Maximum 21dBm
≤-93dBm
1.728MHz
<3W
(L*W*H): 255.5*180.4*48.5mm
About 1560g
0～+45℃(Working Status)
-20～+60℃(Stock Status)
21
Beltpack
3.5mm Headset Interface
LEMO Headset Interface
USB-Type-C Interface
1500mAh Lithium Polymer Battery
200Hz to 7KHz
>50dB
<1%
450 Meters Line-of-Sight Usage
1.9GHz
GFSK
Maximum 21dBm
≤-93dBm
1.728MHz
<0.6W
(L*W*H): 105*65*22.4mm
About 200g
0～+45℃(Working Status)
-20～+60℃(Stock Status)