Hollyland SOLIDCOM M1 User Manual page 15

GUIDE
STATION MENU INTRODUCTION
Long press Menu/Confirm Key for 3 Seconds to enter the Menu, following is the menu
function's Introduction.
①
Select "Network" to Switch WiFi on/off, See the WiFi Password
and IP Address.
②
Select "Master and Slave" to Set the Station as Master
Device/Slave Device.
2.1 If there's only one kit of devices, the station needs to be set as Master Device; When
two or more kits are cascaded, the station can be set as Master Device/ Slave Device.
2.2 When the station is set as Master Device, The beltpack number will automatically
switch to 1-8; When the station is set as Slave Device, The beltpack number will
automatically switch to 9-16.
2.3 This function can only be used when two kits of devices cascaded by Ethernet
interface. The Station needs to be set as Master Device when only one kit of devices used.
③
Select "4 Wire" Entering 4 Wire Audio Settings.
3.1 Enter the Menu to adjust 4 Wire audio system input/output gain.
3.2 Switch sequence of line.
④
Select "Language" to Switch Language to Chinese or English.
⑤ Select "Group" Entering Group Settings.
5.1 One Group: To group all the beltpacks, 2 Wire and 4 Wire audio devices to Group A.
The indicator light of Group A Key on the beltpacks will shine
5.2 Two Groups: To group number 1-4 beltpacks, 2 Wire and 4 Wire audio devices to
Group A, number 5-8 beltpacks to Group B, The indicator light of corresponding groups on
the beltpacks will shine.
5.3 Customize: Able to group beltpacks, 2 Wire or 4 Wire audio devices though Direction
Keys and Confirm Key. After setting the corresponding indicator light of the beltpack will
shine;
5.4 Defaults: Able to group all beltpacks, 2 Wire and 4 Wire to Group A, After setting the
indicator light of Group A will shine.
13