Hollyland SOLIDCOM M1 User Manual page 17

GUIDE
BELTPACK MENU INTRODUCTION
Long press Menu Key for 3 seconds to enter the menu, Following is the introduction of
each function.
①
Connect the Beltpack to the Station by USB-A to TypeC Cable,
Select "Pair", the Beltpack can Paired with Station.
Select the usable number from 1 to 8 to confirm paring, Both the station and the beltpack's
screens will display "Pairing...". Disconnect the beltpack from station when the screens
Display "Pairing Successful".
②
Select "SideTone" to set the SideTone Output Volume.
SideTone off when it is at Level 0, The SideTone will Increase from Level 1 to 3.
③
Select "Language" to Switch Language to Chinese or English.
④
Select "Reset" to Reset all the Adjusted Info of Beltpack to Defaults.
⑤
Select "Info" to Check the Information of the Beltpack.
⑥
Select "Exit" Exit to the Main Menu.
15