Sinclair SWC-86A User And Installation Manual page 15

Register
Command
Address
03/06/16 17
03 18
03 19
03 20
03 21
03 22
03 23
● The minimum interval of data packet is 100 ms. In case of
excessive data in a single data packet, adjust the time
interval appropriately.
● The numerical analysis method is different in different
temperature systems. At Celsius, the value of the register is
10 times the actual temperature. When setting the register
value, the input value should be an integer multiple of 5; In
Fahrenheit, the value of the register is equal to the actual
temperature, and there is no special provision for setting the
register value.
Parameter Name
00: Two-pipe cooling and heating
01: Two-pipe cooling
02: Two-pipe cooling +Electric auxiliary
heating
System type
03: Two-pipe heating +Electric auxiliary
heating
04: Two-pipe cooling and heating
+Electric auxiliary heating
05: Four-pipe
Restore factory
0: General; 1: Restore factory settings
settings
High fan speed
00: OFF; 01: ON
status
Medium fan
00: OFF; 01: ON
speed status
Low fan speed
00: OFF; 01: ON
status
Valve 1 status 00: OFF; 01: ON
Valve 2 status 00: OFF; 01: ON
CAUTION
12
Parameter Range
Default
Value
0
0
0
0
0
0
0