Wall-Mounted - BT RELATE 3000 User Manual

5958 Relate 3000 UG [1]

Wall-mounted

Use the base stand provided as a template to pencil on the
wall where the drill holes should go.
1. Drill the holes for the screws using a 8mm drill bit.
Then insert the wall plugs provided.
2. Insert the screws, leaving about 5mm sticking out.
3. Insert the clips on the base stand into the holes in the base
of your phone marked
quite firm to fix it securely.
4. Position the wall-mounting slots in the base stand over the
screw heads and gently pull the phone downward to make
sure it is securely in place. You will need to rotate the
handset hook to stop the handset from falling off.
All manuals and user guides at all-guides.com
12/2/04 11:48 am Page 9
BT Relate 3000 ~ Issue 2 ~ Edition 01 ~ 11.02.04 ~ 5958
WALL MOUNT. You may need to be
Getting started
Before you wall-mount your BT
Relate 3000 check that:
The wall can support the weight of
the phone.
The position you choose leaves
sufficient space so that the phone
is clear of any obstruction on the
wall, such as a shelf or a cupboard.
The power cable and telephone
line cord will reach their correct
wall points.
Handset hook
Rotate the handset hook 180˚ so
that the handset will stay in position
when the phone is wall-mounted.
9