Errors Without Error Message - WMF 9000 S+ User Manual

Messages and instructions | Errors without error message
The ON/OFF switch reacts after about 1 second
and the coffee machine switches off.
In order to clear an error, for example if the
software hangs up, touching and holding the
ON/OFF switch will switch off the controller.
Afterwards, switch the coffee machine on again.
8.3

Errors without error message

Error pattern
• No milk foam / no milk
dispensing, although
there is milk in the
container
• Milk foam not OK
• Temperature too cold or
too hot
• Milk foam not OK
• Temperature too cold or
too hot
96
Action instructions
™ ™ Check whether the milk hose is kinked or
squashed
™ ™ Remove and clean the silicone cap
™ ™ Perform a milk system cleaning
w Care w Milk system cleaning, page 81
Basic Milk
™ ™ Change milk nozzle
Use a suitable milk nozzle on the combi spout.
Milk nozzle
• very cold milk (up to 8 °C)
• chilled milk (8 to 16 °C)
• non-chilled milk (above 16 °C)
™ ™ Clean the combi spout
w Care w Milk system cleaning, page 81
If error not remedied
™ ™ Use another milk nozzle from the accessories
Easy Milk / Dynamic Milk
™ ™ Check whether the milk temperature is the same
as the set temperature
Dynamic Milk
™ ™ Perform a quality check
NOTE
3 kW
green
white
caramel
User Manual WMF 9000 S +