Messages and instructions
8.3
Errors without error message
Error pattern
No hot water dispensing
but water in grounds
container
No Choc dispensing but
water in grounds container
Choc portion controller
blocked, Choc dispensed
only with water
Coffee dispensing on the
left / right differs
No milk foam / milk output,
but milk in milk container
Milk foam incorrect,
temperature too cold or
too hot
The milk cooler does not
cool
Pump runs continuously,
water in grounds container
Milk foamer
and water tank:
assembly / disassembly stiff
Choc / Topping hopper
cannot be replaced
58
Action instructions
Clean hot water spout
Call WMF Service (coffee dispensing possible)
Do not use Choc dispensing
Call WMF Service (coffee dispensing possible)
Clean portion controller
w C are w P roduct hopper cleaning, page 47
Empty powder
Turn dosing auger manually until all powder is removed
If necessary rinse with water
(Allow to) dry completely
Clean the combi spout
w C leaning instructions
Check whether the milk hose is kinked or squashed
Re-route milk hose correctly
Clean the combi spout
Check whether milk nozzle is blocked
w C leaning instructions
Check whether milk cooler is iced
Change milk nozzle
- green milk nozzle for cooled milk
- white milk nozzle for uncooled milk
Clean the combi spout
w C leaning instructions
Check if the milk cooler has been properly turned on
using the separate switch
Switch off the coffee machine and on again
If error not remedied call WMF Service
Lightly smear the O-rings with WMF gasket grease
w I nstructions in Customer Check-up Kit.
Manually turn the drive for the dosing auger at the
portion controller slightly in a clockwise direction
User Manual WMF presto!