WMF 9000 S+ User Manual page 28

Operation | SteamJet cup warmer
3.10 SteamJet cup warmer
Burn hazard / scalding hazard
• Hot steam is produced by the SteamJet cup
warmer. The cups and adjacent surfaces also
get very hot.
> Use heat-resistant cups.
> Always place a cup upside-down over the
cup warmer before dispensing steam.
> Do not touch the adjacent surfaces
immediately after dispensing.
> Do not touch the spouts immediately after
dispensing.
> Never use the SteamJet function without the
drip grid in place or without the cup warmer
insert.
Health hazard / hygiene
• The SteamJet function is intended for
warming the cup and is not intended to be
used for cleaning.
> Always use freshly washed cups when
warming cups.
The SteamJet cup warmer can use steam to warm
up cups.
™ ™ Place a cup on the cup warmer with the opening
facing downward
™ ™ Touch the pad
Hot steam slowly flows into the cup from below.
The jet of steam stays on for the time set in the
settings.
™ ™ Touch the SteamJet button again
The steam jet stops immediately.
28
CAUTION
Follow the Safety chapter
w starting on page 7
Clean drip tray daily
w Care
starting on page 76
CAUTION
Follow the Safety chapter
w starting on page 7
SteamJet pad active / inactive
w Operating options
page 53
User Manual WMF 9000 S +