Postselection; Caffeine-Free - WMF 9000 S+ User Manual

Software | Operating options

PostSelection

Options: • active
Default value:
active The type of coffee and the size of the
beverage are requested after the beverage has
been selected.
The names of the types of coffee and the sizes
can be modified. (Type of milk, types of syrup,
type of coffee and S-M-L).
The displays and options will vary, depending
on the model.
• Size 1, 2 and 3
• Portioner 1, 2, 3, and 4
• Milk type 1 and 2
• Cold beverages
• Syrup 1, 2, 3, and 4 (optional)
For self-service mode, a few functions can be switched
to be inactive.
The functions and their pads are not displayed in the
inactive state.

Caffeine-free

Options: • active
Default value:
Decaf factor
The value for the Decaf factor is entered here.
Ground coffee quantity for Decaf (decaffeinated
coffee) is set by percentage for the ground coffee
quantity set in the recipe.
This setting applies to all coffee beverages with
pre-selected "Decaf".
Setting range: -25 % to 15 %
Default value: 10 %
56
• inactive
inactive
• inactive
inactive
DS_04_05_03
PostSelection
Options which are needed by the
post-selection function are enabled
in the System menu.
System
w starting on page 66
DS_04_05_05
Caffeine-free
For a Decaf factor of 15 %, Café
Crème is brewed with 15 % more
ground coffee, for example, when
prepared using the Decaf function.
User Manual WMF 9000 S +