Technical Specifications - TC Electronic FINALIZER Service Manual

Technical Specifications:

Analog Input
Connectors: XLR balanced (pin 2 hot)
Impedance: 15 kOhm
Max. Input Level: +22 dBu
Sensitivity: @ 12 dB headroom: -22 dBu - 10 dBu
A to D Conversion: 20 bit (4 bit, 64 times oversampling)
Dynamic Range: > 105 dB
THD: < 0.003% @ 1 kHz, +10dB
Frequency Response:
Crosstalk: < -60 dB max, 10 Hz - 20 khz
Analog Output
Connectors: XLR balanced (pin 2 hot)
Impedance: 100 Ohm (active transformer)
Max Output Level: +22 dBu
Output Gain Range: 0 to -32 dB
D to A Conversion: 20 bit (4 bit 64 times oversampling)
Dynamic Range: > 96 dB
THD: < 0.008% @ 1 kHz, +10 dB
Frequency Response: 10 Hz - 20 kHz: +0, - 0.2 dB
Crosstalk: < -60 dB max, 10 Hz - 20 kHz
Digital Inputs and Outputs
AES/EBU In/Out: XLR
S/PDIF In/Out: Coaxial, RCA Type
Formats: EIAJ CP-340, IEC 958, S/PDIF (20 bit)
AES/EBU (24 bit)
Sample Rates: 32 kHz, 44.1 kHz, 48 kHz
__________________________________________________________________________________________________________________________________________________________________________________________________
TC Electronic A/S
10 Hz - 20 kHz: +0, - 0.2 dB
PC-CARD Interface
Connector:
Standards:
Card Format:
Control Interface
MIDI:
Pedal:
General
Finish:
Dimensions:
Weight:
AC Power:
Battery Life:
Radio Frequency Immunity/Interference
RFI/ESD:
Environment
Operating Temperature:
Storage Temperature:
Humidity:
Note: All specifications are subject to change without notice
Finalizer Service manual
PC-CARD Type 1 cards
PC-CARD 2.0, JEIDA 4.0
Supports up to 2 MB SRAM
In/Out/Thru: 5 Pin DIN
1/4 inch phone jack
Black anodized aluminum face plate
Painted and plated steel chassis
19" x 1.75" x 8.2"
5.2 lbs (2.35 kgs)
90 - 240 VAC without switch settings
3 Pin IEC power connector
>10 years
Conforms to FCC Class B,
EN55103-1 (CE), EN55103-2 (CE)
32 °F to 122 °F (0 °C to 50 °C)
-22 °F 167 °F (-30 °C to 70 °C)
Max. 95% non-condensing
page 19