Error And Maintenance Messages - Brother MFC-J995DW Reference Manual

Hide thumbs Also See for MFC-J995DW:
Table of Contents

Advertisement

Error and Maintenance Messages

The most common error and maintenance messages are shown in the table. For more detailed
information, see the Online User's Guide.
You can correct most errors and perform routine maintenance yourself. If you need more tips, go
to your model's FAQs & Troubleshooting page on the Brother Solutions Center at
support.brother.com.
If the touchscreen displays error messages and your Android
feature, touch your device to the NFC symbol on the control panel to access the Brother
Solutions Center and browse the latest FAQs from your device. (Your mobile telephone
provider's message and data rates may apply.)
Make sure the NFC settings of both your Brother machine and your Android
to On.
Error Message
B&W Print Only
Replace ink.
Cannot Detect
Cannot Detect Ink
Volume
Data Remaining in
Memory
Action
One or more of the color ink cartridges have reached the end of their
lives.
Replace the ink cartridges.
For more detailed information, see the Online User's Guide: Replace
the Ink Cartridges.
The machine may stop all print operations and you may not be able to
use the machine until you install a new ink cartridge in the following
cases:
• If you unplug the machine or remove the ink cartridge.
• If you select the Slow Drying Paper option on the machine or in
the printer driver.
Use a new Genuine Brother Ink Cartridge. If the error is not cleared,
call Brother Customer Service.
Take out the new ink cartridge and reinstall it slowly and firmly until it
locks into place.
For more detailed information, see the Online User's Guide: Replace
the Ink Cartridges.
Check the model numbers of the ink cartridges and install the correct
ink cartridges.
See Related Information: Supply Specifications at the end of this
section.
Use a new Genuine Brother Ink Cartridge. If the error is not cleared,
call Brother Customer Service.
Press
. The machine will cancel the job and clear it from the
memory. Try to print again.
device supports the NFC
device are set
20

Advertisement

Table of Contents
loading

Table of Contents