Brother MFC-J995DW Reference Manual page 25

Error Message
Repetitive No
Paper Fed
Replace Ink
Touchscreen Init.
Failed
Tray Settings
Unable to Clean
XX
Unable to
Initialize XX
Unable to Print
XX
Unable to Scan XX Disconnect the machine from the power for several minutes, and then
Action
Clean the paper pick-up rollers.
For more detailed information, see the Online User's Guide: Clean the
Paper Pick-up Rollers.
One or more of the ink cartridges have reached the end of their lives.
Replace the ink cartridges.
For more detailed information, see the Online User's Guide: Replace
the Ink Cartridges.
• You can still scan even if the ink is low or needs to be replaced.
The touchscreen was pressed before the power on initialization was
completed.
Make sure nothing is touching or resting on the touchscreen,
especially when plugging the machine in.
Debris may be stuck between the lower part of the touchscreen and its
frame.
Insert a piece of stiff paper between the lower part of the touchscreen
and its frame and slide it back and forth to push out the debris.
This message is displayed when the setting to confirm the paper type
and size is enabled.
To not display this confirmation message, change the setting to Off.
For more detailed information, see the Online User's Guide: Change
the Check Paper Size Setting.
A foreign object, such as a paper clip or a piece of ripped paper, is in
the machine.
Open the scanner cover and remove any foreign objects and paper
scraps from inside the machine. If the error message continues,
disconnect the machine from the power for several minutes, and then
reconnect it.
If you cannot print received faxes, transfer them to another fax
machine or to your computer.
For more detailed information, see the Online User's Guide: Transfer
Your Faxes or Fax Journal Report.
reconnect it.
If you cannot print received faxes, transfer them to another fax
machine or to your computer.
For more detailed information, see the Online User's Guide: Transfer
Your Faxes or Fax Journal Report.
24