Table of Contents
Advertisement
Additional Functionality
Setting the countdown timer
Use this for timing any activity, for example baking
bread.
1.
Touch the
button, the display will flash.
2.
Set the countdown time you want by using
. Commence with setting the number of seconds
first. The minutes and hours can then be set by
subsequently pressing the
adjusting using
or
change the timer will stop flashing, confirming the
timer has been set.
3.
To cancel the timer touch the
will flash. Then touch and hold
until the timer is cleared.
4.
To stop the beeper, touch any button.
NOTE: The clock display cannot be selected when the
timer is operating.
Elapsed Time
When an oven function is selected (other than pyrolytic
clean) an elapsed timer commences on the display.
To reset this timer touch and hold both the
buttons until the timer is reset.
Displaying the oven temperature
During operation of the oven the current oven
temperature during pre-heating of the oven can be
displayed by touching the
operation the set temperature can be reviewed by
touching the
button.
NOTE: this temperature will only be displayed for
approximately 5 seconds.
Light operation
During operation of the oven the light can be switched
off by touching and holding the
light turns off. Also the light can be turned on from the
standby state by touching and holding the
until the light comes on.
Activating the child-proof lock
When the child lock is engaged, the oven cannot be
operated and the door cannot be opened.
1.
Switch off the appliance using the function
selector switch.
2.
Touch and hold the
time until the word 'SAFE' is displayed and a double
beep is sounded. The word SAFE will be replaced by
a padlock symbol on the display after 5 seconds.
and
button again and
. 5 seconds after the last
button, the display
and
buttons
and
button. During normal
button until the
button
and
buttons at the same
Releasing the child-proof lock
Touch and hold the
and
time until a double beep is sounded. This will commence
to unlock the door and after 5 seconds the oven is ready
for use.
Activating the function lock
The active function can be locked so it is not changed
unintentionally.
1.
The active function can be locked, to activate touch
and
together until 'Loc' is displayed.
2.
If the oven is switched-off while in 'Loc' it will
switch into Child lock mode and the display will
show 'SAFE'.
3.
Oven can be released the same way as 'Releasing
the child proof lock'
Safety Cut-out feature
The oven automatically switches itself off if the
temperature is not adjusted or the appliance is left
operating after a period of time. The oven switches
itself off after:
•
12.5 hours when the temperature is set less
than 120°C.
•
8.5 hours when the temperature is set to 120°C
or above, and below 200°C.
•
5.5 hours when the temperature is set to 200°C
or above, and below 250°C.
•
3.0 hours when the temperature is set at 250°C.
DEMO Mode
The oven can be set to operate in a demo mode (e.g. in a
retail store). In this mode the display works and functions
can be set but the oven does not actually heat. When
in this mode the text 'DEMO' will be lit. The following
instructions show how to enter and exit 'Demo' mode.
1.
Ensure the oven is in the off state. Toggle and hold
until a beep sounds. The 'DEMO'
the selector to
text will begin to flash.
2.
Toggle the temperature selector to set the first digit
of display to 2. Touch clock to set.
3.
Repeat step 2 until display shows 24:68. 3 beeps
sound and DEMO will be shown.
To disable DEMO mode repeat steps 1 - 3.
buttons at the same
USING YOUR OVEN
31
Hide quick links:
Advertisement
Table of Contents
