INSTALLATION OF THE APPLIANCE (CONTINUED)
Freestanding installation (continued)
WARNING
•
Appropriate fasteners must be used to suit the type
of wall on which the anti-tilt brackets are installed.
•
Freestanding unit must be pushed up against
the wall on installation. On gas units check that
the gas hose, if used, has not been kinked during
installation.
4.
The anti-tilt brackets must be secured to the
rear wall of the cavity with appropriate fasteners
according to dimensions in diagram.
12
INSTALLATION OF THE APPLIANCE
Anti-tilt bracket
installation
reference line
370
Install anti-tilt brackets
in this orientation as
shown (fasteners not
supplied)
C
L
425
370