Electric Diagram - Galanz XQB80-G1E Owner's Manual

Hide thumbs

Table Of Contents

Table of Contents

Available languages

Put Clothes into the Washing Machine

1.Loosen the clothes before putting them into the

washing machine.

2.Each load should be under the rated capacity.

Do not overload the washing machine every time.

3.Different thickness / sizes / categories of the laundry

can affect the actual load capacity. It is advisable

to load the amount of clothes that allows normal

overturning during washing.

Washing Steps

1.Open the cover and load laundries.

2.Add adequate detergent and softener according to

the washing amount, and then close the cover.

3.Press the "Power" button to connect the power.

4.Press the "Program" button to select your required

washing procedure.

5.Press the "Start/Pause" button to start washing.

6.When the washing is finished, a warning tone sounds;

after the warning tone is off, the power will be turned

off automatically.

Please refer to the below table for washing procedures.

Washing by Initial Procedure

The washing machine turns to "Standard" as initial after

being turned on. The operations are as the below:

1.Turn on the inlet tap.

2.Open the cover and put laundries piece by piece into

the washing machine.

3.Add adequate detergent and softener; then close the

drawer.

4.Close the cover.

5.Press the "Power" button to connect the power.

6.Press the "Start/Pause" button to start the washing

machine; then the washing procedure is started.

First Use

Carry out a complete washing process without loading

any laundries for the first time.

Detailed Operations:

1.Connect the power and inlet hose.

2.Turn on the tap

3.Press "Power" and then "Start/Stop"

The remaining water inside the washing resulted from

tests by the producer is driven out .

Washing Finish

After any procedures finishes, the washing

machine will sound automatically to remind

you to take out the clothes or to re-use.

使用程序参照

Detergent amount

Detergent type

Water level

(Laundry amount)

Please pour the detergent into the tub after putting

in the clothes that need to be washed.

Manual Selecting

You can control washing manually instead of

using the initial setting.

The operations are as follows:

1.Turn on the inlet tap.

2.Open the cover and put the laundries piece

by piece into the washing machine.

3.Add adequate detergent, then close the

drawer and the cover.

4.Press the "Power" button to connect the

power.

5.Press the "Program" button, select the required

producedure.

6.Press the "Level" button, select the required

water level.

7.Press the "Start/Pause" button to start washing.