Parts And Features; Installation - Galanz XQB80-G1E Owner's Manual

Safety with children
Keep children away from the washing machine at all times. To avoid the risk of injury do not allow children
to play on or near it or to play with its controls. Supervise children whilst you are using it.
Older children may only use the washing machine if its operation has been clearly explained to them and
they are able to use it safely, recognising the dangers of misuse.

Parts and features

Guide Filter
Drum
Control Panel

Installation

Backout Packing
Remove all the packing (inclidomg the foam base), or
the vibration and noise may occur.
Put all package materials(e. g. the plastic bag) to a
place unreachable to children. After removing all
packages, check if the machine is intact. If any
questions, please contact the seller immediately
before use.
Please do not install the packaging inserts into the
washing machine, otherwise the washing machine
will generate abnormal sound and be damaged.
Water drops may appear on the packing plastic bag
and the glass of the observation window occasionally.
They are condensation resulted from water testing
before the product leaves the factory. It is normal.
Installation for Rat guard
When the package is opened, please put the
washing machine on a soft object (e. g. towel, wool
blanket) gently.
Push the ratguard into the bottom end of the block
from right to left by hand, then take it up lightly as
shown in figure.
Left
Rat Guard
If the floor is uneven, adjust the leveler so as to make the washing machine be even,
Please do not put any wooden pieces or other objects under the foot base.
Top Cover
Pulsator
Level Adjustment
The shape of the machine shown in the manual is only for instruction purpose.
Users should be subject to the actual model that they buy. Please be excused
for any inconvenience.
Right
Soft Object
Power Plug
Cabinet
Placement Requirement
Install the washing machine on a solid and level floor
surface, please do not locate
it on cushions or brackets.
Do not install the washing machine in rooms where
temperature below freezing may occur. Do not expose
it to the weather ,and keep it away from heat sources
such as coals and gas cylinders.
A distance of 10 cm to the wall is required as shown
in the right diagram.
Allowable a lope under the
entire washing machine
is 2° . Slant or uneven
ground may cause
unstable function
or other failures.
3
Inlet Valve
Back Cover
Base