Automatic Fan Speed (Indoor Unit); (A) Cooling; (B) Heating - Sanyo SPW-XR253GH56 Technical Data & Service Manual

2-3 Automatic Fan Speed (Indoor Unit)

By pressing the FAN SPEED button on the remote controller, the fan speed can be set at
one of four steps: AUTO., HI., MED., or LO. When set at AUTO. the indoor unit fan speed
will be automatically adjusted to the room temperature as the two charts shown below.

(A) Cooling

When the fan speed changes, it keeps the speed step for at least 3 minutes, even if the
temperature changes to another speed step during the time.

(B) Heating

When the fan speed changes, it keeps the speed step for at least 1 minute, even if the
temperature changes to another speed step during the time.
ROOM TEMP.
(deg)
+3
+2
+1
SET TEMP.
INDOOR FAN
H
SPEED
M
H : High L : Low
M : Middle LL : Very low
Chart Explanations and notes
ROOM TEMP.
(deg)
SET TEMP.
–2
–4
INDOOR FAN
SPEED H
H : High L : Low
M : Middle LL : Very low
Chart Explanations and notes
II - 5
2. Processes and functions
H
M
L
0433_M_S
H
M
M
L
0434_M_S
Fig. 4
1
2
3
4
Fig. 5
5
SM830080