Auto-Flap Control - Sanyo SPW-XR253GH56 Technical Data & Service Manual

2-17 Auto-flap Control (Indoor Unit : 4-Way Air Discharge Semi-Concealed Type
Auto flap can control the air flow in 5 steps.
Operation mode
Cooling/dehumidifying
1
Standby for heating
(1) When the unit is stopped, the Auto-flap returns to F5 position.
1 2
(2) When the airflow direction is set (an optional setting), the auto and Swing settings will
be released. To return the mode to auto-flap control, change the operation mode.
(3) Once Auto-flap is set, the flap position will be input in the memory.
(4) When the operation mode is changed, the unit starts to search flap position. (if a
search action for sensing flap position is not succeeded in one minute, only the swing
3
is operated.)
4
5
F1
F2
F3
Automatic setting
F2
Fan F2
Heating F4
F2 (The flap returns to the original position after
2. Processes and functions
Ceiling-Mounted Type)
60°
F4
F5
Cooling F1~F3
Heating F1~F5
1328_M_I
Flap position
Optional setting
F1 • F2 • F3 • Swing
F1 • F2 • F3 • F4 • F5 • Swing
F1 • F2 • F3 • F4 • F5 • Swing
release of the standby mode.)
II - 18
Fig. 21
SM830080