Super X11SCL-IF User's Manual
2.2 Motherboard Installation
All motherboards have standard mounting holes to fit different types of chassis. Make sure
that the locations of all the mounting holes for both the motherboard and the chassis match.
Although a chassis may have both plastic and metal mounting fasteners, metal ones are
highly recommended because they ground the motherboard to the chassis. Make sure that
the metal standoffs click in or are screwed in tightly.
Phillips Screwdriver
(1)
Tools Needed
LED4
LED2
JPL1
JPL2
JPG1
JWD1
JPME2
JLED1
FANA
Location of Mounting Holes
Note: 1) To avoid damaging the motherboard and its components, please do not use
a force greater than 8 lbf-in on each mounting screw during motherboard installation.
2) Some components are very close to the mounting holes. Please take precaution-
ary measures to avoid damaging these components when installing the motherboard
to the chassis.
Phillips Screws
VGA
Intel
i210
ASpeed
AST2500
LAN1/2
SP1
B1
LED5
MH5
BIOS LICENSE
Intel
C242
JTPM1
JBT1
M.2-H
22
(4)
COM1
USB4/5
(3.0)
IPMI LAN
USB0/1
X11SCL-IF
REV:1.01
DESIGNED IN USA
CPU
I-SATA1
JSD1
USB8(3.0)
JSD2
Standoffs (4)
Only if Needed
LED3
JF1
1
I-SGPIO1
FAN1
FAN2