Quick Reference Table - Supermicro X11SCL-IF User Manual

Super X11SCL-IF User's Manual

Quick Reference Table

Jumper Description
JBT1 CMOS Clear
JPG1 VGA Enable
JPL1, JPL2 LAN1, LAN2 Enable
JPME2 ME Manufacturing Mode
JWD1 Watchdog Timer
LED Description
LED2 BMC Heartbeat LED
LED3 Onboard Power LED
LED4 Unit Identifier (UID) LED
LED5 CATERR LED
Connector Description
B1 Onboard Battery
COM1 COM Port
FAN1 ~ FAN3, FANA CPU/System Fan Headers
IPMI_LAN Dedicated IPMI LAN Port
Intel® PCH SATA 3.0 Ports (with RAID 0, 1, 5, 10)
I-SATA0 ~ I-SATA3
I-SATA2 and I-SATA3 supports SuperDOM
I-SGPIO1 Serial Link General Purpose I/O Header
Speaker Header
JD1
(Pins 1-4: Speaker; Pins 3-4: Onboard Buzzer)
JF1 Front Control Panel Header
JL1 Chassis Intrusion Header
JLED1 3-pin Power LED Header
JPW1 24-pin ATX Power Supply Connector
JPW2 4-pin Power Connector
JSD1, JSD2 SATA DOM Power Connectors
JSTBY1 Standby Power Header
JTPM1 Trusted Platform Module (TPM)/Port 80 Header
JUIDB1 Unit Identifier (UID) Switch
LAN1/2 1GbE LAN Ports
M.2 Slot for PCI-E 3.0 x4 or SATA 3.0
M.2-H
(Supports M-Key 2280 and Intel Optane Memory)
MH5 M.2 Mounting Hole
SLOT1 CPU PCI-E 3.0 x16 Slot
Notes: The table above is continued on the next page.
Default Setting
Open (Normal)
Pins 1-2 (Enabled)
Pins 1-2 (Enabled)
Pins 1-2 (Normal)
Pins 1-2 (Reset)
Status
Blinking Green: BMC Normal
Solid Green: Power On
Solid Blue: Unit Identified
Solid Orange: System CATERR
12