Dimm Installation; Dimm Removal - Supermicro X11SCL-IF User Manual

DIMM Installation

1. Insert the desired number of DIMMs
into the memory slots based on the
recommended DIMM population table on
page 29.
2. Push the release tabs outwards on both
ends of the DIMM slot to unlock it.
3. Align the key of the DIMM module with the
receptive point on the memory slot.
4. Align the notches on both ends of the
module against the receptive points on the
ends of the slot.
5. Press the notches on both ends of the
module straight down into the slot until the
module snaps into place.
6. Press the release tabs to the lock positions
to secure the DIMM module into the slot.

DIMM Removal

Press both release tabs on the ends of the
DIMM socket to unlock it. Once the DIMM
module is loosened, remove it from the
memory slot.
LED4
VGA
Intel
i210
ASpeed
AST2500
LED2
JPL1
SP1
JPL2
B1
JPG1
LED5
MH5
JWD1
BIOS LICENSE
JPME2
JLED1
FANA JTPM1
M.2-H
Release Tabs
31
Chapter 2: Installation
COM1
USB4/5
(3.0)
IPMI LAN
LAN1/2
USB0/1
X11SCL-IF
REV:1.01
DESIGNED IN USA
CPU
LED3
JF1
I-SATA1
I-SGPIO1
Intel
JSD1
C242
FAN1
FAN2
USB8(3.0)
JBT1
JSD2
Notches
Press both notches
straight down into
the memory slot.
1