Connecting Alarm Input/Output - Vip-Vision Panoramic Series Quick Start Manual

No. Port Name
5
DC 12V/AC
24V power
input
For more information about I/O port, see Table 1-2.
Port Port Name
ALARM_OUT
ALARM_OUT_G
ND
Alarm I/O
ALARM_IN1
ALARM_IN2
ALARM_IN_GN
D

Connecting Alarm Input/output

Alarm input/output is available on select models.
Connect alarm input device to the alarm input end of the I/O port.
Device collects different states of alarm input port when the input signal is idling and being
grounded.
Device collects logic "1" when input signal is connecting to +3V to +5V or idling.

Device collects logic "0" when input signal is grounded.

Connect alarm output device to the alarm output end of the I/O port. The alarm output is
relay switch output, which can only connect to NO alarm devices.
Function Description
Inputs DC 12V/AC 24V power. Please be sure to supply power as instructed in
the Guide.
When using AC 24V power, please connect the power input port to 2PIN

converter first.
Device abnormity or damage could occur if power is not supplied

correctly.
Table 1-2 Alarm information
Function
Outputs alarm signal to alarm device.
When connecting to alarm device, only the ALARM_OUT port and
ALARM_OUT_GND port with the same number can be used together.
Receives the switch signal of external alarm source.
Connect different alarm input devices to the same ALARM_IN_GND
port.
Alarm input
2
Quick Start Guide