Modifying Device Ip Address - Vip-Vision Panoramic Series Quick Start Manual

The Device initialization interface is displayed.
Select the devices that need initialization, and then click initialize.
The password setting interface is displayed. See Figure 2-2.
Set and confirm the password of the devices, and then enter a valid email address. Click
Next.
The final setting interface is displayed.
Password can be modified or reset in System Settings.
Select the options according to your needs and then click OK.
The Initialization interface is displayed after initializing is completed. Click the success icon
( ) or the failure icon (
Click Finish.
The device status in the Modify IP interface (Figure 2-1) turns to Initialized.

Modifying Device IP Address

You can modify IP address of one or multiple devices in one time. This section is based on

modifying IP addresses in batch.
Modifying IP addresses in batch is available only when the corresponding devices have the

same login password.
Double-click "ConfigTool.exe" to open the tool.
Click .
The Modify IP interface is displayed. See Figure 2-1.
Password setting interface
) for the details.
5
Quick Start Guide