Logging In To Web Interface - Vip-Vision Panoramic Series Quick Start Manual

Select the devices which IP addresses need to be modified, and then click Modify IP.
The Modify IP Address interface is displayed. See Figure 2-3.
Select Static mode and enter start IP, subnet mask and gateway.
IP addresses of multiple devices will be set to the same if you select Same IP.

If DHCP server is available in the network, devices will automatically obtain IP

addresses from DHCP server when you select DHCP.
Click OK.

Logging in to Web Interface

Open IE browser, enter the IP address of the device in the address bar and press Enter.
If the setup wizard is displayed, follow the instructions to finish the settings.
Enter user name and password in the log in box, and then click Login.
For first time login, click Click Here to Download Plugin and install the plugin as instructed.
The main interface is displayed when the installation is finished.
Modify IP Address interface
6
Quick Start Guide