Table of Contents
Advertisement
Act as Local Time Server
You can determine the internal time server to act as local time server for your network. If you
have a time server available, you should not activate this function.
¤
Click on Yes/No to determine the internal time server to act/not to act as local time server.
Date and time are synchronised system-wide on all base stations and handsets. It can
take up to one hour until the manually changed time is visible on every handset.
Synchronisation is carried out in the following cases:
•
If a handset is registered to the telephone system.
•
If a handset is switched off and switched back on again, or is outside the wireless
range of the telephone system for more than 45 seconds and then comes back
into range.
•
Automatically every night at 4.00 am.
You can change the date and time on the handset. This setting only applies for that
handset and will be overwritten when the next synchronisation takes place.
The date and time are displayed in the format set for that handset.
Firmware
Use this page to make adjustments in order to keep the phone system up-to-date via firmware
updates.
It is only available in the Integrator user interface for the user role admin.
Regular updates to the firmware for the Integrator/DECT manager and base stations are
provided by the operator or supplier on a configuration server. You can upload these updates
onto the Integrator/DECT manager as required. If a firmware update is provided in the form of
an update file, you can store it on your computer and download it from there.
The base stations' firmware is updated automatically by the DECT manager.
¤
Settings
System
Current version
Shows the current firmware version of the Integrator/DECT manager on which you are logged in.
Backup available for previous version
You can downgrade the firmware by installing any older version. When installing a new firmware
the system automatically creates a data backup for the recent firmware. If you later downgrade
to this version the data backup will be installed on the system. This way you have a downgrade
to previous firmware version and data settings.
Downgrade to any other version will reset the device to factory settings.
Selecting the firmware update file
¤
In the URL to firmware file text field specify the URL of the configuration server where the
firmware is located
Firmware
System settings
107
Advertisement
Table of Contents
