Ups Setting - PROLiNK PROFESSIONAL I Series User Manual

3-3. UPS Setting

LED6 LED7 LED8 LED9 LED10
LED1 LED2 LED3 LED4 LED5
LED3 flashing: Output voltage setting

Interface
LED4 flashing: Bypass enable/disable when UPS is off

Interface
00: Exit setting

Interface
LED3 or LED4 flashing indicates setting
program. There are two setting programs.


LED7, LED8, LED9 and LED10 flashing
indicates value or disable selection.
Setting
For 200/208/220/230/240 VAC models, you may choose
the following output voltage:
LED7: presents output voltage is 208Vac
LED8: presents output voltage is 220Vac
LED9: presents output voltage is 230Vac
LED10: presents output voltage is 240Vac
Setting
Enable or disable Bypass function. You may choose the
following two options:
LED8: Bypass enable
LED7: Bypass disable
Setting
Exit setting mode.
17
LED3: Output voltage setting
LED4: Bypass enable/disable when
UPS is off