Table of Contents
Advertisement
Installation and Use
Specifications
Power
External Wall Mount Transformer to 16VAC, 50 Hz, 1 AMP
Pneumatic Source
50 scfm @ 6 bar pressure (87psi)
Temperature: 0 to +50 degrees Celsius
Operating Conditions
Humidity: 0 – 95% non condensing
Weight
3.5 kg. (7.8lbs.)
Dimensions
8.25" wide X 13.62" height X 6.38" depth
Six Discrete 12-24V Optically Isolated Inputs with screw lug terminals
Inputs available: Batch Reset, Manual Wrench Accept, Parameter Select (3) and Disable
Inputs/Outputs
Four Dry Contact Relays with screw lug terminals
Outputs available: Cycle Accept / Reject, Batch Accept / Reject
CE, UL & VED rated up to 7 amps at 48V AC/DC
Internal Thermal Printer for documentation of cycle data
Printer (optional)
onto individual labels; 2" x 4" adhesive backed
Serial Port
RS 232 port; RJ45 connector
Interface
Dual Line 0.5" LCD backlit (16) character
Up, Down, Enter (Menu), "Back" & ADMIN
Five-button keypad
"
Back" button: Momentary for Batch reset, hold down 2 sec for Over-ride.
LED Indicators
&
CYCLE OK / NOK Indicators
BATCH OK / NOK Indicators
Separate IP address with buffered memory provides asynchronous network communica-
EtherNET (optional)
tion.
Supports standard WINDOWS based TCP/IP (10baseT) protocol; female RJ-45 connector
DTU
Expands to use of (4) parameter sets, memory of rundown data (700 readings/PSET)
(Data Transfer Unit)
Statistics and date/time information.
(optional)
PSI-C
5
Advertisement
Table of Contents
