Table of Contents
Advertisement
Use the UP / DWN arrows to find
the parameter set desired. Press
ENTER to select.
Default HI & LO Limits are set to
+/- 15% of Torque Target
PSI-C
OPERATION FLOWCHART
INITIAL SETUP (FSC)
---- SIGMASIX LLC----
10066.03.16.07
- CAL TRANSDUCER -
CHECKING CAL
- CAL TRANSDUCER -
CHECKING MAX
- CAL TRANSDUCER -
PARAMETER # 1
- NOM CAL VALUE-
TQ :
-- CAL TRANSDUCER --
CHECKING ZERO
-- CAL TRANSDUCER --
CHECKING MAX
-- CAL TRANSDUCER --
—- SET TARGET —-
TORQUE: 50.0
-- SET HI LIMIT --
TORQUE: 57.5
CONTINUED ON NEXT PAGE
PSI-C
Holding the "eyes" will
Clear and Set Zero
COMPLETE
NOT SETUP
75.0
COMPLETE
---- SIGMASIX LLC----
CLEAR COMPLETE
11
Advertisement
Table of Contents
