Safety; Warnings; Safe Use - Stanley PSI-C Installation And Use Instructions And Warnings

Safety

The safety notices and warnings for protection against loss of life (the users or service personnel) or for the protection against damage to property
.
are highlighted in this document by the terms and pictograms defined here. The terms used in this document and marked on the equipment itself
have the following significance:
-Indicates that death or severe personal injury will result if proper precautions are not taken.
Danger -
-Indicates that death or severe personal injury may result if proper precautions are not taken.
Warning
-
Caution -Indicates that property damage may result if proper precautions are not taken.
-
-Indicates an electrical hazard. This icon appears as a part of a Danger, Warning, or Caution notice.
-Indicates a general hazard. This icon appears as a part of a Danger, Warning, or Caution notice.
-Tool -Read and understand all the safety recommendations and all operating instructions before operating tools and qualifiers. controller

Warnings

To Avoid Injury:
-Tool controller
- Read and understand all the safety recommendations and all operating instructions before operating tools and qualifiers.
- Save these instructions for future reference.
tool
- Train all operators in the safe and proper use of power tools.
- Operators should report any unsafe condition to their supervisor.
- Follow all safety recommendations in the manual that apply to the tools being used and the nature of the work being performed.
- Verify that all warning labels illustrated in this manual are readable.
- Replacement labels are available at no additional cost from Stanley Assembly Technologies.
To Avoid Injury:
- Only allow suitably qualified personnel to install, program, or maintain this equipment and or system.
- These persons must be knowledgeable of any potential sources of danger and maintenance measures as set out in the Installation
Operations, and Maintenance manual.
- This product must be transported, stored, and installed as intended, and maintained and operated with care to ensure that the product
functions correctly and safely.
- Persons responsible for system planning and design must be familiar with the safety concepts of automation equipment.

Safe Use

This manual is intended to promote proper and safe use and give guidance to owners, employers, supervisors and others responsible for training and
safe use by operators. Qualifiers from Stanley Assembly Technologies are intended for use in industrial threaded fastening or precision position and
줍니 . Stanley Assembly Technologies
or adjustment applications only. Some instructions may not apply to all applications. Please contact your Stanley Sales Engineer for information or
assistance on Stanley training for assembly Qualifier operation.
Stanley
PSI-C-0406 PSI-C
.
.
Tool
Stanley Assembly Technologies
합니 .
합니 .
.
Stanley Sales Engineer
,
,
W A R N I N G
.
합니 .
.
W A R N I N G
,
, ,
Installation and Use
.
.
.
.
.
.
.
.
,
, , ,
.
threaded
.
.
.
.
.
3