Wiring The Door Activation Or Safety Device; Wiring Sentrex; Wiring The Counter; Tune-In Instructions - Stanley Magic-Swing HDLE Quick Reference Manual

3.8

Wiring the Door Activation or Safety Device

Attachments 5 and 6 illustrate typical wiring for various devices. Though the specific device may not be
shown, this attachment can be used as a general guide. Specific wiring instructions from the manufacturer
must also be consulted.
3.8.1 Refer to Attachments 5 and 6 and applicable manufacturer's instructions, and
CONNECT door activation or safety device.
3.9

Wiring Sentrex

3.9.1 Refer to Attachment 7, and CONNECT Sentrex
TB2 Terminal
3.10

Wiring the Counter

3.10.1 Refer to Figure 5, and CONNECT wiring for counter.
4.

TUNE-IN INSTRUCTIONS

4.1

Initial Tune-In Settings

4.1.1 DISCONNECT power pigtail assembly.
© 2002, THE STANLEY WORKS. ALL RIGHTS RESERVED.
NOTE
3
Connection
1 VSX (+) Power for Sensor Head
2 Serial Communication
3 Serial Communication
4 GND (-) Ground for Sensor Head
Figure 5. Counter Wiring
2
3
RED
S/D
CNT
BLACK
3
as follows:
Sentrex
COUNTER
1
2
3
TB3
4
203959
Rev. F, 10/2/02
11 of 23
3
Wire Color
Red
Green
White
Black
MCB005