Advertisement
Quick Links
Assembly Instructions
Model 1448
Contemporary Harvest Table
A. Assembly uses the Bastion System; a simple yet rugged compression fastening system.
B. This unit is made of solid North American hardwood and has a factory applied oil finish.
See the enclosed booklet for care instructions.
C. Directions (left/right, front/back) are given as facing the front of an assembled unit.
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for CATSKILL 1448
Summary of Contents for CATSKILL 1448
- Page 1 Assembly Instructions Model 1448 Contemporary Harvest Table A. Assembly uses the Bastion System; a simple yet rugged compression fastening system. B. This unit is made of solid North American hardwood and has a factory applied oil finish. See the enclosed booklet for care instructions.
- Page 2 Model 1448 Parts List P/N: FL/BRleg1448B (2) Front Left/Back Right Legs 33-1/2” x 2-3/16” x 2-3/16” P/N: FR/BLleg1448B (2) Front Right/Back Left Legs 33-1/2” x 2-3/16” x 2-3/16” P/N: TT1448B (1) Table Top 48” x 24” x 2” P/N: TBK1448B (1) Top Back Brace 39-1/2”...
- Page 3 Model 1448 Hardware 1 1/4” Phillips Flat Head #8 Screw (14) L-Brackets (4) P/N: L-Bracket 1448B (used on “L” Bracket) 5/8” Phillips Flat Head #6 Screw (8) T-Nut (4) Pipe End Cap 5/8” (2) (used to attach glides) P/N: T-Nut 1448 P/N: End Cap 1448B 7/16”...
- Page 4 TIPS ON HOW THE BASTION FASTENING SYSTEM WORKS 1. The Bastion fastening system consists of a steel post (threaded on one end with a hole through the shaft on the other end); a Barrel Nut (cylindrical barrel-shaped with Illustration Bas. 1 threaded open end &...
- Page 5 STEP 1 Table top “L” Bracket holes Assemble Side Panels nut access holes A. Each side panel consists of two (2) legs, one not used (1) top side brace and one (1) glide support brace. TOP SIDE BRACE When assembled, diagonal legs will be the same (i.e.
- Page 6 STEP 2 Attach Drawer Glides to Glide Support Sticks A. Take the drawer glides, extend them to their fullest. See illustration 4. The glide has 3 parts. Remove the furthest extended part (1) (smallest) by pushing the black plastic lever down – then pull part out, separating it.
- Page 7 STEP 3 Attach Back Brace A. You may find it easiest to attach the back brace and shelves by inverting the island. Attach the back brace with bastions to the right and left side assembly. STEP 4 Attach Shelves A. It is recommended to get a friend to help hold the shelves in place as you attach them using 1-1/4”...
- Page 8 STEP 5 Table Top Preparation & Attaching Attach four (4) “L” brackets to the bottom side of the table top using 5/8” #6 screws. Note the proper position of the “L” brackets. STEP 6 Attach Table Top Utilizing the “L” brackets, attach the table top with 5/8”...
- Page 9 STEP 8 Assemble Drawer A. Attach the Drawer Back to the Left and Right Drawer Sides with four 1 1/4” #8 screws. Make sure the slot that runs the length of the Sides are aligned with the slot in the Drawer Back to accept the Drawer Bottom.
- Page 10 STEP 9 Attach Towel Bar See Illustrations 9A and 9B. Screw Nickel Plated Towel Bar Posts into the drawer front using 1 1/4”#8 screws. Attach pipe holder by sliding supports over the posts and secure with tiny set screws using Allen Wrench provided.
- Page 11 STEP 10 Insert Drawer A. Align the drawer glides attached to the drawer and the other half of the glides attached to the glide support braces. Slide the drawer all the way in until you hear an audible click. The drawer should now be secured to the glides.
- Page 12 Catskill Craftsmen’s factory. For Please send me______# of bottle(s) of the one eight ounce (8 fl. oz.) bottle, which Catskill Craftsmen Butcher Block Oil at $6.95 is sufficient for two applications, simply per bottle. My check or money order is send $6.95 along with the completed...
Need help?
Do you have a question about the 1448 and is the answer not in the manual?
Questions and answers