Advertisement
Quick Links
Assembly Instructions
Model 1468
Deep Drawer Double Drop Leaf Cart
GENERAL:
1. You have purchased model 1468.
2. Should you need assistance or need to replace a damaged or missing part simply give us a call M-F at
607-652-7321 from 7:30 am - 4:30 pm EST and we'll send you the prepaid part via UPS usually that same day!
You may also email us info@catskillcraftsmen.com.
3. Read the assembly instructions and the enclosed brochure before beginning assembly. Assembly is easy
if you read and follow the instructions step by step. See our website for assembly tips and videos:
www.catskillcraftsmen.com
4. The only tools needed are a hammer and a screwdriver. A power screwdriver is recommended. Where
possible we have packaged some of the screws in separate labeled packages. A friend is recommended to assist
with the assembly. Some parts are large and awkward to hold in place.
5. Glides are sometimes pre-packed with screws. These are not used.
6. Instructions (left/right, top/bottom) are given as you face an assembled unit.
Advertisement
Related Manuals for CATSKILL 1468
Summary of Contents for CATSKILL 1468
- Page 1 Deep Drawer Double Drop Leaf Cart GENERAL: 1. You have purchased model 1468. 2. Should you need assistance or need to replace a damaged or missing part simply give us a call M-F at 607-652-7321 from 7:30 am - 4:30 pm EST and we’ll send you the prepaid part via UPS usually that same day! You may also email us info@catskillcraftsmen.com.
- Page 2 Parts List Model 1468 Top Side Braces (2) P/N B-1469/TS 13” x 7.75” x 3/4” Table Top (1) Drop Leaf (2) P/N TT-1468 P/N DL-1468 20” x 22” x 1 1/2” 20” x 12” x 1 1/2” Top Back Brace (1)
- Page 3 Hardware List Model 1468 To ease assembly, sort and count the hardware before getting started. (Drawer Backs and Shelves) 3/16” Flat Washer (2) Allen Wrench 1 1/4” Phillips Flat Head #8 Screw (12) (Attaches Hinges Bastion Post (16) Drop Leaf Supports) 5/8”...
- Page 4 TIPS ON HOW THE BASTION FASTENING SYSTEM WORKS 1. The Bastion fastening system consists of a steel post (threaded on one end with a hole through the shaft on the other end); a Barrel Nut (cylindrical barrel-shaped with threaded Illustration Bas. 1 open end &...
- Page 5 STEP 1 Assemble Side Panels not used in front legs Nut access holes A. Each side panel consists of two (2) legs, one (1) top side brace and one (1) glide support brace. TOP SIDE BRACE When assembled, diagonal legs will be the same Bastion Post (i.e.
- Page 6 STEP 2 Attach Drawer Glides to Glide Support Sticks A. Take the Drawer Glides, extend them to their fullest. See illustration 2A. The glide has Push this lever down, then slide the inner glide section 3 parts. Remove the furthest out of the glide assembly.
- Page 7 STEP 3 Attach The Top Back Brace You may find it easiest to attach the Top Back Brace and shelves by inverting the island. The Top Side Braces are located 1 1/4” down on the legs. This allows clearance for hinges and the drop leaf supports.
- Page 8 STEP 5 Attach Legs to Table Top With top still inverted line up pilot holes with hole in the L Brackets and secure top to leg assembly with 5/8” #6 screws. STEP 6 Attach Casters, Middle and Bottom Shelves With unit still upside down, tap caster sockets into holes in leg ends until seated, then tap casters. Hit on metal part of caster to seat.
- Page 9 STEP 7 Assemble Drawer A. Attach the drawer back to the drawer sides with 1 1/4” #8 screws. Slide in drawer bottom, best side up. Attach front using the Bastion System. Holes in the posts will be parallel to the long edge of the drawer front.
- Page 10 Visa and Address _____________________________ Mastercard are accepted online. City ________________________________ State ________________ Zip ___________ Catskill Craftsmen, Inc. Please make checks payable to Catskill Craftsmen Inc. 15 West End Ave. 15 West End Ave., Stamford, NY 12167-1296 Stamford, NY 12167-1296...
Need help?
Do you have a question about the 1468 and is the answer not in the manual?
Questions and answers