Table of Contents
Advertisement
3.
Installation
3.1
Installation Environment
Table 3.1 shows the environmental specifications for the robot and controller.
Item
Temperature
Humidity
Altitude
Vibration
Dust
Gas
Sunlight
Power noise
Magnetic field
Dust-proof and
drip-proof
•
Do not place the robot or controller near combustible. If it is not be done
completely, an ignition may occur due to a fault causing a fire.
DUST-PROOF & DRIP-PROOF TYPE SPECIFICATIONS MANUAL
Table 3.1 Environmental specifications
In operation
:
0 to 40°C
In storage
:
–10 to 50°C
20 to 90 % (Non-condensing)
1000 m or less
In operation
:
0.98 m/s
No inductive dust should exist.
No corrosive or combustible gas should exist.
The robot and controller should not be exposed to direct sunlight.
A heavy noise source should not exist nearby.
A heavy magnetic field source should not exist nearby.
Any place where the equipment sinks in liquid shall not exist.
Small chips involved in turning or cutting operation shall not be
contained.
Mist of cutting fluid or coolant oil shall not be contained.
!
Specifications
2
or less
DANGER
– 18 –
STE 80747
Advertisement
Table of Contents
