Transportation; Unpacking - Toshiba TH650A-IP Instruction Manual

2.

Transportation

2.1

Unpacking

The robot and controller are shipped separately in wooden crates or corrugated
cardboards.
Open the packages in a location easily accessible, where the equipment is to be
installed. Take careful precautions not to damage the robot and controller.
After opening the packages, make sure that all the accessories are present and that no
part has been damaged during transport.
The package posture and contents are the same as in the standard robot. Refer to the
TH650A Installation and Transportation Manual provided separately.
For the dust-proof and drip-proof type robot, strictly observe the following cautions.
• The main robot is factory-packed in a vinyl bag for shipment. Carefully
remove the bag after the shipment has reached your office. If the vinyl bag
is pulled by force, the cap or cover may be damaged.
2.2 Transportation
Move the robot and controller very carefully. Make sure that no excessive impact or
vibration is exerted on the equipment. If the equipment is to be subject to vibration
over a long period, be sure to tighten all of the clamp and base attaching bolts
completely and put the equipment back into the wooden crates or corrugated
cardboards.
DUST-PROOF & DRIP-PROOF TYPE SPECIFICATIONS MANUAL
!
CAUTION
– 14 –
STE 80747